|
|
Distributor
American Calibration is proud to be a distributor for many of the industries leading manufacturers, including:
Since 1954 AFFRI® has being designing and producing hardness testers which are used to combine test loads together with devices which concur to make up the AFFRI SYSTEM®. The power supply is indifferently mechanical, electromechanical, hydro-mechanical, pneumo-mechanical. A long - time ago AFFRI SYSTEM® successfully overtook the philosophies of dead-weight and of the relative elevating screws of traditional hardness testers.
AFFRI® made the hardness tester working in Rockwell and Brinell tests truly automatic: only one drive starts up and performs - without a break - the phases of positioning, approach and execution of the test. The fully automatic operation and the speed in the entire test cycle, obtained by AFFRI SYSTEM®, remains unchanged even in the load-cell version, due to the use of unprecedented technologies (patent pending).
Visit Affri to learn more!
Vermont Gage manufactures top qualtiy, made in the U.S.A., Precision measuring instruments for the fixed limit gage industry.
Whether you need english or metric metrology instruments; a single gage or gage set, vt gage provides for all of your guage needs.
If you are looking for a pin gage , plug gage , thread gage , ring gage , triclock gage or taperlock gage , english gage set or metric gage set , look no further.
VTG and Vermont thread gage will fill all of your metrology needs. VT gage also has NPT and NPTF pipe plug gages, thread ring gages.
Fully ISO 9001:2000 certified, quality is assured. Call us for a quote for your chrome gage, steel gage or new Black Guard gage needs in pin, plug, ring, pipe, taperlock, trilock and reversible gages.
Also available: gage sets, custom library sets, thread measuring wires, go/nogo assembly, drill blanks, custom gages and all of your quality metrology requirements, from class xx to class zz, plug gage, pin gage thread gage ring gage, all fixed limit gages, measuring gages and inspection gages are available or can be custom made.
For top quality inspection instruments, demand the best American made gages. Request Vermont Gage and Vermont Thread Gage fixed limit gages.
Founded in 1960 by Albert Meyer, the Meyer Gage Company was the first to introduce Class ZZ gage pins sets. Al Meyer knew that reliable accuracy is essential. World manufacturers depending on Meyer did not happen by chance. At Meyer, our reliability is based on dedication to one field - plug gage manufacturing, continuing investment in state of the art equipment, and our quality assurance inspection program.
The value in Meyer plug gages grows from the company's attention to detail starting with 52100 bearing steel (Carbon Chrome Alloy) hardened throughout. Details like uniform 2" lengths, no sharp edges, marking of both boxes and gages, sizes laser etched with serial number on each piece (except M-0 Pins) further contribute to the innate value of the Meyer line.
Meyer Quality didn't just happen. Al Meyer, founder knew from experience in the '50's that there was a big need for a better standard in convenient hole and bore measurement. He had access to some of the best machinists in the machinist-rich greater Hartford, CT. area. And, he had rigid demands for quality... which were met early and recognized quickly by industry. It continues today.
Now, in it's second generation, John Meyer Vice President is in charge of all manufacturing, and James Meyer President is head of marketing and distribution, so the Meyer "touch" is never far away.
Meyer strives to ensure customer satisfaction by continuously improving the effectiveness of our process and providing on time delivery of defect free products to their valued customers. Complete customer satisfaction is their goal.
Each Meyer Gage Co. employee is responsible for reaching desired requirements the first time by performing every task to its standards or initiating action to cause formal changes.
Comprehensive documentation governs Meyer Gage Co.'s Quality Program, procedures, practices, forms, drawings, and similar documentation that affect product quality shall be formally documented and controlled. All such documents are maintained and easily accessible.
Meyer Gage Co. is comprised of several facilities and divisions. Each business unit and / or manufacturing operation is autonomous with a documented quality system and quality manual defining each unit's methods of controlling products and services.
For more than 100 years, OHAUS has been the brand of choice for customers who are looking for quality made, full-featured scales and balances at an economical price. Ever since the OHAUS Harvard Trip Balance set the standard by which the weighing industry would be measured, both our products and the OHAUS name have been recognized as among the most reliable in the business.
With their vast experience in the design, development and marketing of scales and balances in the Laboratory, Industrial, Education, Retail, Food, Jewelry and specialty markets, OHAUS has earned its reputation as a trusted global supplier of precise, reliable and affordable products that meet virtually any weighing need. They remain firmly focused on continuing our long-standing record of success and on expanding our global presence with new products, new solutions and new relationships around the world.
Headquartered in Pine Brook, New Jersey with offices throughout Europe, Asia and Latin America, OHAUS has succeeded by delivering quality products that meet their customers' needs and supporting those products with responsive, reliable customer service.
Qualitest is a global contender and one of the top-ranking manufacturers and suppliers of testing technologies worldwide. With their extensive portfolio of state-of-the-art and competitively priced testing machines, systems and software, they supply standard or customized solutions for many test, measurement and quality control tasks required in the world of modern materials testing.
The key products from Qualitest range include hardness testers, universal testing machines, metallography, materials testing equipment, spectroscopy, microscopy, portable testers, and instruments for testing metals,plastics, rubber, textiles, paper, paint, cement, concrete and packaging materials, as well as technologies for NDT/Ultrasonic, surveying, automotive, aerospace, mining, oil/gas/pipe industries, gold & Jewellery applications and much more.
With more than 40 years in business, United Calibration Corporation has become one of the world's premier manufacturers of state-of-the-art material testing systems. United offers tensile testing, hardness tester, material testing and polymer evaluation equipment as well as calibration services throughout the U.S. and internationally through a network of factory authorized representatives.
United customers have come to appreciate United's dedication to quality, performance, value and customer satisfaction. Their experienced staff at both the factory in Huntington Beach, California, and the sales and service facility in Flint, Michigan stand ready to meet your material testing hardware, software and service requirements.
Sun-Tec Corporation has been a leader in the hardness testing industry for nearly a decade. Located just outside of Detroit in Novi, Michigan, operating out of their newly built, 10,000 square foot facility. Proudly equipped with all the amenities necessary to address their customer’s needs, which include an impressive showroom and full-production machine shop for repairs and rebuilds.
Sun-Tec Corporation offers a diverse collection of products from hardness testers to accessories. Clark Instrument, Detroit Testing Machine Company and Service Diamond Tool are all divisions of Sun-Tec Corporation. Each specializes in its segment covering Rockwell-Type, Vickers, Knoop, Brinell, Ductility, Tensile, Compression, and Portable testing – in addition to Specialty Machines and equipment for Metallographic Preparation. Their staff has all the experience and know-how required to address any situation in hardness testing. From product insight to service repairs, you can count on them to get you up and running in no time. They carry a vast array of accessories and hardness standards to meet any testing requirement – and each hardness standard is calibrated to meet all government and ASTM parameters. If there is something you’re looking for and can’t find it on our website, please contact us - most parts are in stock or can be made to your specifications.
New and Certified-Refurbished Calibration Equipment For Sale
American Calibration stocks a variety of new and refurbished test machines.
Exchange or buy out of your current equipment. Contact sales right now for further information, 815-356-5839.
We have many equipment items and tools in stock for immediate sale.
This list is only a general list of equipment we have available. Please call today and see if we have the equipment you need.
The Tru-Blue II can be used for producing standardized test blocks and indenters!
Since 1984, United has manufactured computer controlled closed loop Rockwell testers. Our second generation Rockwell tester the .Tru-Blue II. is the lowest priced USA manufactured closed loop tester that meets ASTM E18, ISO 6508 specifications and NIST recommendations.
The Tru-Blue II comes standard with a Direct certification of the hardware calibration with NIST traceability and a 1-year Indirect calibration of the customers specified hardness scales. Along with a user friendly control panel, the tester can be put into operation without the need for an on-site calibration or manufacturers assistance!
Having no dead weights, pivot points and knife edges to move out of adjustment, the Tru-Blue II can be moved to a location without having to be re-calibrated. Mounted on United.s optional mobile stand the Tru-Blue II becomes portable and can be used in different departments.
|
Precise Digital Controller
For New, Used or Retrofit Applications!
The Precise Digital Controller is designed for manual or servo-equipped tension and compression testing machines. It is a presettable unit that simplifies materials testing and requires a minimum amount of training. The Precise features load, crosshead position and strain inputs plus enhanced closed-loop servo capabilities for accurate and repeatable testing. The Precise provides two control segments per test under load, position or strain servo control.
The Precise is an inexpensive and easier to use alternative to PC/Windows based materials testing systems. It can store three test procedures in memory so that the operator can perform a variety of tests quickly and error free.
Applications include testing plastics, film, textiles, nonwovens, rubber, adhesives, metals, wire plus a variety of products.
|
MTESTWindowsTM
The Materials Testing System for Tension and Compression Testing!
MTESTWindows™ price/performance is unsurpassed in the industry and is ideal for most testing applications:
Production Testing
Quality Control
Research
Product Development
Product Evaluation
Bend Testing
Tensile Testing
Compression Testing
Peel Testing
MTESTWindows™ is a third generation Materials Testing System for electrohydraulic
and electromechanical testing machines. It's unique design consists of a 32-bit
Windows Application Program and an easy-to-install external interface box which
makes MTESTWindows™ ideal for new and retrofit installations. MTESTWindows™
flexible interface provides connectivity to virtually every load frame regardless of
age, manufacturer or application. It's base configuration consists of load, crosshead
position and axial strain input channels with options for a transverse strain channel
and servo control.
|
WinCom PLUS
Serial Communications, Data Management and Plotting Program.
Unlock the power of your ADMET controlled testing machine by automating your
data storage, improving your test documentation and increasing your test diagnostic
capabilities!
Transmit raw test data and test results from your ADMET digital indicator to your
computer and:
Eliminate data entry errors by importing test results into your client reports.
Save test results to your company network for easy access and safe keeping. Never loose data.
Use the plotting features to ensure that your tests are being performed to ASTM specifications.
Save money and aggravation by eliminating the need for a printer at your testing machine.
WinCom inCom and WinCom PLUS Features.....
WinCom software provides the same serial communications capabilities as WinCom PLUS
software, but without the plotting capabilities.
WinCom and WinCom PLUS software work with all current ADMET digital indicators that have
serial communications capabilities including the Gage Buster, Gage Buster PLUS, DC16 and
Precise Digital Controller.*
WinCom and WinCom PLUS software are easy-to-use Windows 2000/XP compatible programs.
WinCom and WinCom PLUS software are invaluable tools for analyzing test data and diagnosing
the performance of a testing machine. Use WinCom and WinCom PLUS to analyze whether your
testing is being performed at the desired load, position or strain rates.
|
Hardness Testers
Rockwell
American Calibration calibrates and repairs all major manufacturer hardness testers. Field service is available for all makes including Wilson, Newage, Mitutoyo, Buehler, Clark and Detroit Testing. Calibration Procedures are performed in strict compliance to ISO/IEC 17025. Certifications are printed on-site by field technicians upon completion.
Microhardness
The Affri Micro Auto VT 10 saves time and does not require metallographic preparation of the sample. Easy to use motorize X-Y table for fully automatic tests series on the sample and automatically research test positions for Zig-Zag tests.
Direct readout HV 0.2 to HV 10 by HVT system.
Brinell
The Affri LD 3000 hardness tester is a very practical and strong instrument designed to perform Brinell hardness tests at 3000 kg and other loads starting from 10Kg in addition to performing Vickers measurements. The integral AFFRI system assures high performance using automatic selection and application of loads through a simple touch panel.
Digital readout of load force and dwell time help the operator during the test.
The test force is closed loop controlled through an electronic load cell connected to the indenter. All errors linked to weight systems are eliminated, the test is fast and there is an absolute increase in accuracy in every condition.
The operator is required only to push the twin start buttons to initiate the complete test sequence: auto contact with the test surface, clamping, application of the test loads, release of sample.
Tensile Testers
American Calibration calibrates and repairs all major manufacturer tensile testers. Field service is available for all makes including Instron, Tinius Olsen, Universal, and Detroit Testing. Calibration Procedures are performed in strict compliance to ISO/IEC 17025. Certifications are printed on-site by field technicians upon completion.
American Calibration distributes the Detroit Testing "Olson cup" type ductility tester with a range of 40,000 lbs and single valve operation. The G2 series has been the most widespread ductility tester in the industry for decades. Trade-ins are always welcome and we also carry used and refurbished machines ready for immediate delivery.
Olson Cup Tester
This simple and reliable ball punch deformation tester is used for evaluating the ductility of metallic sheet materials. It features quick change of dies for different thickness materials and excellent visibility of tests for operators inspection.
SPECIAL FEATURES
Single valve control operation
Adjustable speed control
Maximum hand pointers
Hydraulic clamping proportional to load
STANDARD ACCESSORIES
Large 12-inch Gages (Load)
.001 Displacement indicator (Height)
7/8" Ball penetrator
Complete set of dies
Hydraulic pump and electric motor assembly
OPTIONAL ACCESSORIES
Erichsen punch
20mm Ball
Erichsen dies
Digital displacement indicator
Eagle II UTM
With our advanced technology and quality manufacturing standards, we have produced a machine that is one of the most accurate and easy to use on the market today. All our units utilize a single, precise, mechanical screw actuator to apply loads at speeds from 0 to 500 mm / min (0 to 20"/ min). Our M10k, M20k and M30k units are bench type with optional floor-standing tables available. Our M60k and M120k models are floor standing.
|
|
|
 "Click to view Larger")